Graco Extend2fit Convertible Car Seat Reviews
In this Graco Extend2Fit Convertible car seat reviews, we will discuss all the facilities, Installation methods, pros, and cons. The Graco Extend2Fit Convertible Car Seat was created to solve all the parental concerns of selecting a car seat.
The best features of the Extend2Fit car seat are the extendable tray that provides five inches extra legroom in the rear-facing position. These additional 5 inches make a huge difference in comfort level.
The Extend2Fit has an extended weight limit of 50 pounds in the rear-facing position. It can hold the baby longer in the rear-facing. And your baby can stay in this car seat comfortably for up to 3 years.
And when your baby crosses 50 pounds, you can simply convert it to a forward-facing 5 point harness. The harness mode can hold babies from 22 pounds to 65 pounds in the forward-facing position and up to 49 inches tall. The Graco Extend2Fit Convertible Car Seat provides excellent safety and comfort for both babies and toddlers.
G
Graco Extend2Fit Convertible Car Seat | Ride Rear Facing Longer with Extend2Fit, Gotham
Features of Graco Extend2fit Convertible Car Seat
This seat can hold babies in the rear-facing position from 5 pounds to 50 pounds and from 22 pounds to 65 pounds in the forward-facing position. This seat has an adjustable four-position extension panel that provides extra 5-inch legroom for the children in the rear-facing position. It allows your child to remain rear-facing securely for a long time.
The seats are Graco Protect plus engineered, and crash tested to protect your baby from frontal, sideways, back, and rollover crashes. The seat is made of a Steel-reinforced frame to provide strength and durability.
This seat comes with A Safe Adjust system so that you can easily adjust the headrest and headrest height when your baby grows. The one-second right latch system and Fuss Free harness storage that keep the buckle out of the way made it very easy to get your baby in and out.
You can easily adjust the 6 position recline angle and 10 position headrest to make your baby more comfortable in the car seat.
The easily readable level indicator and the one-second in right Latch system make the installation easier for you.
Integrated dual cup holder so that you can keep baby’s favorite drinks and snacks coles.
And the plush seat pad is machine washable so that you can keep your baby’s seat always clean.
Target group
Children from 4 pounds to 65 pounds.
Main Benefit
The 4-position extension panel adjusts, The one-second in right Latch system, Steel-reinforced frame, Simply Safe Adjust harness system, 6 position recline angle.
Technical Details
● Item Weight: 23.2 pounds
● Product Dimensions : 22.1 x 19.2 x 25.2 inches
● UPC: 047406136551
● Item model number: 1963212
● Minimum weight recommendation: 5 Pounds
● Maximum weight recommendation: 65 Pounds
● Number of items: 1
● Style : 2-in-1
● Batteries required: No
● Rear-facing minimum child weight: 4 Pounds
● Rear-facing maximum child weight: 50 Pounds
● Forward-facing minimum child weight: 22 Pounds
● Forward-facing maximum child weight: 65 Pounds
Our balanced Opinion
The Graco Extend2Fit is the best option if you want to keep your baby safer rear-facing. This seat provides high safety and extreme comfort at a reasonable price. This seat provides an easy installation system and easy buckling system to make your everyday use easy. And the seat is FAA approved, so you can travel freely anywhere without compromising your child’s safety.
Pros
● Reasonable price.
● Extended rear-facing weight limit.
● Very soft and comfortable cushion, shoulder pads, infant headrest, and body inserts.
● Six recline positions, 4 of which can be used rear-facing.
● Easy installation method.
● Doesn’t take up a lot of room in the car.
● Easy Adjustable harness and headrest.
● Two buckle positions.
● Harness storage compartment on both sides of the seat for keeping extra buckle straps.
● Steel-reinforced frame.
● The cover is plus and machine washable.
● 10-position headrest with a no-rethread harness.
● Dual cup holder.
● FAA approved.
Cons
The seat takes up more room when the largest panel is extended in rear-facing.
Tightening the harness is not that easy.
It’s a bit difficult to remove and reattach the cover.
Solution of CONS
Read the car seat manual carefully and follow all the instructions properly.
User’s Opinion
Users say this seat is very compact and easily fits in any vehicle. They can easily install and remove the seat. And the one-second in right Latch system and fuss-free buckle storage helps them a lot to get their baby in and out every time. They say the seat pad and cushion are very soft, and their baby feels very comfortable in the seat. Users also say that they have no worry about safety; the seat has proper protection.
Some users also said that the seat fitted perfectly in the aircraft, and they could easily carry the seat.
Installation
Installing Rear-Facing With LATCH Straps
- Keep the top tether strap and attach the tether hook into the right-side plastic bar of the car seat.
- Recline the car seat and, by pulling out the handle forward, adjust to one of the four rear-facing positions.
- Spot the car seat in the rear-facing position on the vehicle seat. Make Sure 80% of the base of the car seat is on the vehicle Seat.
- Route the LATCH strap through the rear-facing blue-marked belt path.
- Attach the Latch connectors into the lower anchors of the vehicle. Make sure the latch strap is laying flat and there is no twist on the strap.
- Squeeze the adjustment handle and pull the extender out to use additional legroom.
- Firmly push down in the middle of the car seat and tighten the strap by pulling it out.
- Park the car on level ground and check the level indicator. The ball needs to fully cover the light blue circle if you use the seat for infants of 3 months and under.
- Push the seat and check if the seat is moving more than one inch. If it is moving more than one inch, it is not securely installed. Install it again.
Installing Rear-Facing with Vehicle Seat Belt
- Keep the top tether strap and attach the tether hook into the right-side plastic bar of the car seat.
- Recline the car seat and adjust to one of the four rear-facing positions by pulling the handle forward.
- Squeeze the adjustment handle and pull the extender out to use additional legroom
- Spot the car seat in the rear-facing position on the vehicle seat. Make Sure 80% of the base of the car seat is on the vehicle Seat.
- Route the seat belt through the rear-facing blue-marked belt path. And make sure there is no twist on the belt.
- Lock the seat belt.
- Firmly push down in the middle of the car seat and tighten the strap by pulling it out.
- Park the car on level ground and check the level indicator. The ball needs to fully cover the light blue circle if you are using the seat for infants of 3 months and under.
- Push the seat and check if the seat is moving more than one inch. If it is moving more than one inch, it is not securely installed. Install it again.
Installing in Forward-Facing with position LATCH Straps
- Unhook the top tether strap and lay it in the seat.
- Adjust the recline position in number 4 for children of 22-40 lb (10-18 kg). MUST use recline position 4 for children under 40 lb in a forward-facing position. Use recline position 5 or 6 for toddlers who are more than 40 lb (18.1 kg)
- Place the car seat in the Forward-facing position on the vehicle seat. Try to set the car seat as flat as possible on the vehicle seat. Make Sure 80% of the base of the car seat is on the vehicle seat.
- Route the Latch strap through the forward-facing orange marked belt path. And make sure there is no twist on the strap.
- Attach the Latch connectors into the lower anchors of the vehicle. Make sure the latch strap is laying flat and there is no twist on the strap.
- Firmly push down in the middle of the car seat and tighten the strap by pulling it out.
- To check the tightness of the strap, grab the seat from the Latch belt side and push the car seat side-to-side and front-to-back. If the car seat is moving less than 1 inch, the seat is tight enough.
- If it’s moving more than 1inch, install the seat again.
Installing Forward-Facing With Vehicle Seat Belt.
- Keep the Latch strap and attach the Latch connectors to the plastic bars.
- Unhook the top tether strap and lay it in the seat.
- Adjust the recline position in number 4 for 22-40 lb (10-18 kg) children. MUST use recline position 4 for children under 40 lb in the forward-facing position. Use recline position 5 or 6 for toddlers who are more than 40 lb (18.1 kg)
- Route the seat belt through the forward-facing orange marked belt path. And make sure there is no twist on the seat belt.
- Lock the seat belt.
- Firmly push down in the middle of the car seat and tighten the belt by pulling it out.
- To check the tightness of the strap, grab the seat from the seat belt side and push the car seat side-to-side and front-to-back. If the car seat is moving less than 1 inch, the seat is tight enough.
- If it’s moving more than 1inch, install the seat again.
The best way to use product
You can wash the seat cushion in the machine.
You can clean the metal and plastic parts with mild soap and cold water. And clean the buckle with a damp cloth. Spot clean the harness straps. Do not use any detergent or solvent to clean any parts of this car seat. Read the car seat manual carefully for complete cleaning instructions.
Why we choose Graco Extend2fit Convertible Car Seat
The Graco Extendfit comes with two user modes. You can use it in both rear-facing and forward-facing positions. And this seat has an extended weight limit in the rear-facing position, which helps your child to remain rear-facing for a long time. And as you know, children remain safer in rear-facing.
The seat is made of reinforced steel, And the seat is Graco Protect Plus engineered to provide your children maximum safety in the vehicle.
The seat has 6 recline positions and 10 headrest positions to provide comfort. And the padding and cushion are very soft; your baby will feel very comfortable in the seat.
And this seat comes with the one-second in right Latch system and Fuss-Free harness storage, which makes buckling so much easier.
And the installation system is also very easy. You can easily move the seat in any vehicle and install it. And The seat cover is easily washable in the machine.
Frequently Asked Question
Question:
Does this have a full steel frame or a reinforced steel frame?
Answer:
Graco Extend2Fit car seat has Steel Reinforced frame.
Question:
Does this item have harness strap covers?
Answer:
The Extend2Fit car seat doesn’t have harness strap covers.
Question:
Can I use this seat on aircraft?
Answer:
Yes, this seat can be used on the aircraft. This seat is FAA approved.
Question:
Is it possible to recline the seat without installing it?
Answer:
The Extend2Fit® Convertible Car Seat is able to be reclined installed or uninstalled.
Question:
Does this car seat come with the base?
Answer:
The Graco Extend2Fit Convertible Car Seat doesn’t require a base. The base of this seat is not removable.
Question:
How wide is the base of this seat?
Answer:
Dimensions of the Extend2Fit™ Convertible Car Seat are: 24.5 x 19.5 x 25.2 inches, 23.2 lbs. The base portion alone on this car seat is 15″ x 15″.
Question:
How to install this seat?
Answer:
There are several ways to install this car seat. Please read the owner’s manual before using it. Also, you can read the installation guide in this Graco Extend2Fit Convertible Car Seat Review.
Conclusion
Graco is one of the well-known and trusted baby product companies who is making the safest baby product for over 60 years.
After This Graco Extend2Fit convertible car seat review, we can say this seat does provide the best quality service. And you will get the best quality seat at a reasonable price.
Some kids get taller and heavier before reaching the average age. And for those kids finding a car seat that will support their weight and height is a challenging job. But the Extend2fit makes the job easy for you with its extended weight limit of rear-facing.
The extend2fit has so many features to keep your baby safe and comfortable in all the rides with this seat.